The APR MS100196 Charge Pipe System is a comprehensive, direct replacement upgrade of the small and restrictive factory rubber and plastic discharge hose and pipe found in the charge piping system of MQB 1.8T and 2.0T engines. The system includes a multitude of enhancements designed for maximum performance, longevity and insurance against power robbing boost leaks.

The factory pipes are small plastic pipes that has shown to melt, deform, and cause boost leaks under extreme conditions. The APR System remedies this by upgrading to larger 60mm aluminum pipes with TIG welded brackets and ridged ends. The APR multi-ply fluorosilicone coated turbocharger outlet hose replaces the OEM rubber hose. APR EZ-Flow stepped lips providing a smooth transition from hose to pipe. The included T-bolt clamps ensure a strong and leak-resistant seal at the pipe. The APR Discharge pipe system is a direct fit to the OEM turbocharger and to either the APR or OEM intercooler hose. The APR Throttle Body pipe is a direct fit to the APR or OEM throttle body hose, as well as the APR or OEM intercooler hose.

Benefits of the APR MS100196 Charge Pipes:

• Direct OEM replacement
  Compatible with all OEM turbochargers.
• APR Aluminum Pipe
  APR's 60mm aluminum piping removes restriction and eliminates the possibility of the pipe melting or deforming in extreme conditions.
• APR EZ-Flow design
  APRs EZ-Flow design provides maximum flow for maximum performance through a smooth, port matched transition from hose to connection surface.
• Multi-ply silicone outer construction
  Four-ply silicone increases both heat and burst resistance as well as mating surface adhesion compared to rubber.
• Fluorosilicone interior surface
  The Fluorosilicone coating greatly resists oil and gasoline permeation providing an extra layer of protection against deterioration of the hoses.
• Clampco T-bolt clamps
  Stainless steel Clampco T-bolt clamps diminish the risk of boost leaks with increased connection strength and decreased hose slippage.
• Additional quality control
  Each APR hose is fully tested to ensure fitment and proper mating of the EZ-Flow stepped diameters.

APRs Engineers took a multi-step approach to optimizing the hoses to minimize boost leaks, reduce turbulence and other performance degradations. Four-ply silicone was utilized as it provides the thickness and strength characteristics necessary to support boost levels far beyond the engines capabilities. A Fluorosilicone internal lining was added to ensure the hoses do not rapidly deteriorate over time when exposed to oil and gasoline from the PCV and EVAP systems. The included stainless-steel Clampco T-bolt clamps prevent the hoses from coming lose under heavy pressure and under high temperatures, silicone adheres to its mating surface, further minimizing leaks and hose slippage. APRs EZ-Flow stepped design creates a smooth airflow path, reducing turbulence over non-stepped designs. Finally, silicone provides better heat resistance over rubber, extending the life of the product and ultimately minimizing failure. The result is a hose solution that directly replaces the factory rubber hoses and maintains performance under extreme conditions!

APR MS100196 Turbo Outlet Hose Kit Vehicle Fitment:

• 2015-2020 Audi A3 *  ____________________________  2015 Audi A3  2016 Audi A3  2017 Audi A3  2018 Audi A3  2019 Audi A3 *  2020 Audi A3 * 
• 2019-2021 Audi Q3  ____________________________  2019 Audi Q3  2020 Audi Q3  2021 Audi Q3 
• 2015-2020 Audi S3 *  ____________________________  2015 Audi S3  2016 Audi S3  2017 Audi S3  2018 Audi S3 *  2019 Audi S3 *  2020 Audi S3 * 
• 2016-2019 Audi TT *  ____________________________  2016 Audi TT  2017 Audi TT  2018 Audi TT  2019 Audi TT * 
• 2016-2019 Audi TTS *  ____________________________  2016 Audi TTS  2017 Audi TTS  2018 Audi TTS  2019 Audi TTS * 
• 2017-2019 VW Alltrack  ____________________________  2017 VW Alltrack  2018 VW Alltrack  2019 VW Alltrack 
• 2019 VW GLI *  ____________________________  2019 VW GLI * 
• 2015-2019 VW Golf  ____________________________  2015 VW Golf  2016 VW Golf  2017 VW Golf  2018 VW Golf  2019 VW Golf 
• 2015-2019 VW Golf R  ____________________________  2015 VW Golf R  2016 VW Golf R  2017 VW Golf R  2018 VW Golf R *  2019 VW Golf R * 
• 2015-2019 VW Golf Sportwagen *  ____________________________  2015 VW Golf Sportwagen  2016 VW Golf Sportwagen  2017 VW Golf Sportwagen  2018 VW Golf Sportwagen  2019 VW Golf Sportwagen * 
• 2015-2019 VW GTI *  ____________________________  2015 VW GTI  2016 VW GTI  2017 VW GTI  2018 VW GTI  2019 VW GTI * 

Requires an aftermarket air intake that replaces the bottom of the OEM airbox.

* The turbo outlet pipe does not fit vehicles with the 7 speed DQ381 transmission.

APR Turbo Outlet Pipe Manufacturing:
The APR Turbo outlet Pipe is made from 60mm diameter aluminum and features a ridge at the ends of the pipe to help hose retention. The APR Turbo Outlet Hose is constructed from Four-ply silicone with a Fluorosilicone coating on the interior surface. Stainless steel Clampco T-bolt clamps are included to secure the hose connections. The APR Throttle Body Pipe is constructed from 60mm aluminum tubing with TIG-welded brackets and a CNC machined billet aluminum MAP sensor mounting point.

APR MS100196 Charge pipe Install:
Installation of the APR Pipes themselves is simple and straightforward however access to the hoses may be challenging. The hot side pipe requires extra work and lower mounting tab spacers to fit manual transmission equipped cars. Basic hand tools are necessary for installation. Please observe all safety precautions and follow proper installation guidelines while working on your vehicle. APR MS100193 Install Manual