Audi Tuning | VW Tuning

It’s been just a touch over one month and riding on the KONI SS coil-overs has been great! However, an opportunity has presented itself and it’s time to swap out to some H&R Ultra-Low coil-overs. We really want to get a good idea of the difference in handling compared to the softer KONI kit as well as get a good idea of the range of lowering the ultra-lows will provide.

It’s also time to give up the Hartmann HROC-233 Wheels and try something else on. Stay tuned for updates!

One of Tim’s first tasks for his newly purchased VW Tiguan was suspension, and H&R Sport Springs have been a very popular choice for many. With a mild inch-and-a-half drop, the end result is just perfect!

To commemorate the 50th Anniversary of the Porsche Club of America in 2006, Porsche built 50 911 Carrera S “Club Coupes” that would be available for sale only to club members. 1 example sits in the Porsche museum in Stuttgart and of the 49 examples spread throughout North America, two are owned by local WA residents – not surprised! All 50 examples received the same gorgeous and unique color of Azurro California Blue Metallic, a 3.8L X51 engine pushing 381 hp, a sport-tuned exhaust system, and a carbon fiber air intake system to name a few key elements that separate these cars from your standard Carrera S. The only thing it lacked was a set of H&R spacers!!

Taking into consideration the amount of suspension travel the car will still have at its current ride height, and using a simple technique to measure wheel spacing thanks to H&R, it was determined that of the sizes available from H&R, the 7mm spacers out back would even out the front-to-rear stance difference the car came with from the factory. Less is indeed more, as the very subtle wider track on this Porsche has it sitting proper!

Thanks to H&R and the recent launch of their www.trakplus.com website, we now have a very resourceful and straight-forward tool to assist us in determining which spacer application to run on your car.  While we’d like to think we know everything there is to know about wheel-spacing, the fact is, “going wide” is not an exact science.  Also, “stance” is purely subjective.  One person’s view of “properly stanced” may likely differ from the next.  And unless you are local and can stop by, several variations such as vehicle ride height and/or tire size makes it difficult for us to tell you with absolute certainty whether or not “x”-size spacer is appropriate for your car.  We can give you an idea, but ultimately it is up to you to decide where within your fenders you want those wheels to sit…

When Peter saw a certain local bagged Audi A6 he knew exactly what he wanted and what direction he was going to go to get there. But he didn’t necessarily want to drop the coin on a button-pressing, height-adjustable air-ride kit, either. Instead, the call came to us which resulted in the purchase of H&R’s Street Performance Coil-Over kit for the C6 A6.

End result…

Hey Mike, time for new wheels.

Seeing the grin on Chris’ face when pulling up his Audi S5 after he had left it with us was satisfying. But probably not as satisfying as the slight rumble Chris heard emit from the Stasis Cat-Back exhaust we had just installed.

It wasn’t just the sound that brought a smile to Chris’ face either, but also the fact that we rolled it out with a new stance ala H&R wheel spacers. 15mm front and 20mm rear spacers brought the factory S5 wheels closer to the fender’s edge and gave the car that “bulldog” stance we like to see.

And while we couldn’t see it, we imagine the grin on Chris’ face was turned into a giddy laugh when he stepped on it getting out of here… The combination of the APR ECU software upgrade for the FSI V8 and the cat-back must have made a lasting impression! Now if we can just convince him to bring the car down to the ground a bit…

Dan felt his Audi A6 sat too high. Even compared to the S-Line suspension packages on the dealer lot, he felt his A6 could stand to sit a touch lower. A call to Achtuning meant a purchase of H&R Street Coil-overs. As one of the very affordable, entry-level coil-over kits for the C6 A6 on the market, H&R’s system offers a range of 1.2 to 2.2 inches and allows the A6 to stay firmly planted on all 4-corners, improving over-all handling.

H&R coil-over kits are very competitively priced in our online catalog. Check and see the incredible pricing we have to offer while shopping coil-overs for your car!

New from H&R and in-stock at Achtuning is their 40mm 5×100 to 5×130 adapter!

We also brought in the new 35mm version of 5×100 to 5×130 and 5×112 to 5×130 adapters. H&R’s 2010 catalog features several new items, all of which is being added to our online gallery as I write this. Achtuning stocks just about every VW/Audi spacer or adapter combination possible, even select BMW applications. Call us for your wheel spacing or adapting needs today!

… Chris brought back his e92 M3 to us to pick up a set of H&R spacers.   After doing a bit of homework, he learned that this particular combination of H&R springs and  factory18″ wheels and tires would allow at most a 12mm spacer both front and rear without having clearance issues.

Lookin’ sharp, Chris!

Kristian Decided that 19″ Hartmann HR8 MS wheels were the wheels he really wanted to complete the look on his A3. After saving his pennies he picked a set up and paired them with a set of 235-35-19 Vredestein Ultrac Sessanta tires.

After getting the HR8 MS wheels installed on his H&R coilover equipped A3 Kristian suspected that the ride quality may be reduced but found just the opposite “To my surprise the ride quality actually is BETTER than the Pirelli p6s even though I stepped up 2″ in wheel size. The ride is smoother, quieter, and has a LOT more grip.”

Thanks Kristian!